OT FIT 35/220 240/350 D NFC L
Aree applicative
- Installazione in sistemi di illuminazione di emergenza secondo la norma IEC 61347-2-13, allegato J
- Adatto per l'installazione nei sistemi di illuminazione di emergenza secondo la norma EN 60598-2-22
- Adatto per apparecchi di illuminazione con classe di protezione I
Dati tecnici
Dati elettrici
Nominal input voltage
220 240 V
Frequenza di rete
0/50/60 Hz Hz
Tensione in ingresso
198 264 V
Tensione continua (cc)
176 276 V
Current set
NFC
Fattore di potenza λ
065C097
Efficiency in full-load
91 %
Perdita di potenza
4,0 W
Corrente di innesco
30 A
Numero max di ECG con autom. da 10 A
19
No. max di ECG p. circuito autom. 16 A
30
Numero max di ECG con autom. da 25 A (B)
-
Resistenza ai transitori (L/N- terra)
2 kV
Resistenza ai transitori (L/N)
1 kV
Tensione in uscita
54 216 V
Corrente in uscita
75 350 mA
Default output current
75 mA
Output ripple current (100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Potenza in uscita
6.1 35 W
Maximum output power
35 W
Galvanic isolation
Non isolated
U-OUT
< 250 V
Total harmonic distortion
< 10 %
Output current tolerance
±3 %
Dimensioni e peso
Distanza tra fori di fissaggi-lunghezza
270,0 mm
Peso prodotto
16800 g
Sezione dei cavi, lato ingresso
0,5 1,5 mm²
Sezione dei cavi, lato uscita
0,5 1,5 mm²
Spellatura dei cavi in ingresso
8,0 9,0 mm
Larghezza
300 mm
Altezza
210 mm
Lunghezza
2800 mm
Spellatura dei cavi in uscita
8,0 9,0 mm
Colori e materiali
Materiale dell'involucro
Metalli
Temperature e condizioni di utilizzo
Temperatura ambiente
-25 +60 °C
Temperatura massima nel punto di prova T
75 °C
Max temp involucro in caso di malfunzion
110 °C
Temperatura di stoccaggio
-40 +85 °C
Umidità relativa
5 85 %
Durata
Durata ECG
50000 / 100000 h
Dati di prodotto aggiuntivi
Incapsulato
No
Caratteristiche
Dimmerabile
No
Protezione contro il surriscaldamento
Reversibile automatico
Protezione contro il sovraccarico
Reversibile automatico
Protezione contro i corto circuiti
Reversibile automatico
Prova funzionamento a vuoto
Sì
Intended for no-load operation
No
Lunghezza massima cavi ECG/lampada
2,0 m
Idoneo per apparecchi con vetro frontale
I
Number of channels
1
Adatta per luce di emergenza
Sì
Programming
Tuner4TRONIC Field App
Sì
Box programming
Yes
Tuner4TRONIC
Sì
Certificati, Norme, Direttive
Marchi di approvazione
CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM
Norme
Secondo EN 61347-1/Secondo EN 61347-2-13/Secondo EN 62384/Secondo EN 61000-3-2/Secondo EN 61000-3-3/Secondo EN 61547
Grado di protezione
IP20
Dati logistici
Codice prodotto di base
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4052899990166
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
76bfa7be-1a77-426d-8d9d-21bf10e67f82
Informazioni sull'imballo
EAN |
Unità |
Pezzo |
Dimensioni |
Peso |
Volume |
---|---|---|---|---|---|
4052899990166 |
UNV
| 1 | 280mm x 30mm x 21mm | 220.00g | 0.18dm³ |
4052899990173 |
VS
| 20 | 309mm x 225mm x 78mm | 4595.00g | 5.42dm³ |
Download
Maggiori informazioni per la famiglia di prodotto
Caratteristiche prodotto
- Frequenza di linea: 0 Hz | 50 Hz | 60 Hz
- Tensione di alimentazione: 220 240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nome del prodotto |
|
|
|
|
|
Scheda tecnica | ||
---|---|---|---|---|---|---|---|---|
OT FIT 35/220
240/350 D NFC L
|
54 216 V | 75 350 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 75/220
240/550 D NFC L
|
54 216 V | 125 550 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 100/220...240/750 D NFC L
|
54 216 V | 250...750 mA | 2800 mm | 300 mm | 210 mm |