OT FIT 100/220...240/750 D NFC L
Aree applicative
- Installazione in sistemi di illuminazione di emergenza secondo la norma IEC 61347-2-13, allegato J
- Adatto per l'installazione nei sistemi di illuminazione di emergenza secondo la norma EN 60598-2-22
- Adatto per apparecchi di illuminazione con classe di protezione I
Dati tecnici
Dati elettrici
Nominal input voltage
220 240 V
Frequenza di rete
0/50/60 Hz Hz
Tensione in ingresso
198 264 V
Tensione continua (cc)
176 276 V
Current set
NFC
Fattore di potenza λ
065C099
Efficiency in full-load
95 %
Perdita di potenza
5,5 W
Corrente di innesco
39 A
Numero max di ECG con autom. da 10 A
10
Numero max di ECG con autom. da 10 A
-
No. max di ECG p. circuito autom. 16 A
16
No. max di ECG p. circuito autom. 16 A
-
Numero max di ECG con autom. da 25 A (B)
-
Resistenza ai transitori (L/N- terra)
2 kV
Resistenza ai transitori (L/N)
1 kV
Tensione in uscita
54 216 V
Corrente in uscita
250...750 mA
Default output current
250 mA
Output ripple current (100 Hz)
≤ 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Potenza in uscita
13 100 W
Maximum output power
100 W
Galvanic isolation
Non isolated
Total harmonic distortion
< 10 %
Output current tolerance
±3 %
U-OUT
< 250 V
Dimensioni e peso
Distanza tra fori di fissaggi-lunghezza
270,0 mm
Peso prodotto
21500 g
Sezione dei cavi, lato ingresso
0,5 1,5 mm²
Sezione dei cavi, lato uscita
0,5 1,5 mm²
Spellatura dei cavi in ingresso
8,0 9,0 mm
Lunghezza
2800 mm
Altezza
210 mm
Spellatura dei cavi in uscita
8,0 9,0 mm
Larghezza
300 mm
Colori e materiali
Materiale dell'involucro
Metalli
Temperature e condizioni di utilizzo
Temperatura ambiente
-25 +50 °C
Temperatura massima nel punto di prova T
75 °C
Max temp involucro in caso di malfunzion
110 °C
Temperatura di stoccaggio
-40 +85 °C
Umidità relativa
5 85 %
Durata
Durata ECG
50000 / 100000 h
Caratteristiche
Dimmerabile
No
Protezione contro il surriscaldamento
Reversibile automatico
Protezione contro il sovraccarico
Reversibile automatico
Protezione contro i corto circuiti
Reversibile automatico
Prova funzionamento a vuoto
Sì
Intended for no-load operation
No
Lunghezza massima cavi ECG/lampada
2,0 m
Idoneo per apparecchi con vetro frontale
I
Adatta per luce di emergenza
Sì
Control interface
-
Number of channels
1
Programming
Tuner4TRONIC Field App
Sì
Programming device
FEIG
Certificati, Norme, Direttive
Marchi di approvazione
CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM
Norme
Secondo IEC 61347-1/Secondo IEC 61347-2-13/Secondo IEC 62384/Secondo IEC 62386/Secondo IEC 61000-3-2/Secondo IEC 61000-3-3/Secondo IEC 61547
Grado di protezione
IP20
Dati logistici
Codice prodotto di base
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
11-08-2023
Primary Article Identifier
4062172122863
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
8a53955f-cb2c-421c-b735-328caec80e98
Informazioni sull'imballo
EAN |
Unità |
Pezzo |
Dimensioni |
Peso |
Volume |
---|---|---|---|---|---|
4062172122863 |
UNV
| 1 | 215.00g | ||
4062172122870 |
VS
| 20 | 309mm x 225mm x 78mm | 4495.00g | 5.42dm³ |
Download
Maggiori informazioni per la famiglia di prodotto
Caratteristiche prodotto
- Frequenza di linea: 0 Hz | 50 Hz | 60 Hz
- Tensione di alimentazione: 220 240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nome del prodotto |
|
|
|
|
|
Scheda tecnica | ||
---|---|---|---|---|---|---|---|---|
OT FIT 35/220
240/350 D NFC L
|
54 216 V | 75 350 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 75/220
240/550 D NFC L
|
54 216 V | 125 550 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 100/220...240/750 D NFC L
|
54 216 V | 250...750 mA | 2800 mm | 300 mm | 210 mm |