OT FIT 35/220...240/350 D CS L
Vantaggi prodotto
- Conforme ai requisiti di sicurezza grazie alla protezione dai sovraccarichi, dalle sovratemperature e dai corto circuiti
Aree applicative
- Adatto per apparecchi di illuminazione con classe di protezione I
Dati tecnici
Dati elettrici
Nominal input voltage
220 240 V
Frequenza di rete
50/60 Hz
Tensione in ingresso
220 240 V
Current set
DipSwitch
Fattore di potenza λ
098
Efficiency in full-load
91 %
Perdita di potenza
4,0 W
Corrente di innesco
30 A
Numero max di ECG con autom. da 10 A
12
Numero max di ECG con autom. da 10 A
20
No. max di ECG p. circuito autom. 16 A
19
No. max di ECG p. circuito autom. 16 A
32
Resistenza ai transitori (L/N- terra)
2 kV
Resistenza ai transitori (L/N)
1 kV
Tensione in uscita
40 160 / 40 115 V
Corrente in uscita
200 / 250 / 300 / 350 mA
Output ripple current (100 Hz)
< 4 %
Output PSTLM
≤1
Output SVM
≤0.4
Potenza in uscita
8 40,3 W
Maximum output power
40.3 W
U-OUT
< 250 V
Total harmonic distortion
< 10 %
Default output current
350 mA
Dimensioni e peso
Distanza tra fori di fissaggi-lunghezza
200,0 mm
Peso prodotto
12500 g
Sezione dei cavi, lato ingresso
0,5 1,5 / 0,75 1,5 mm²
Sezione dei cavi, lato uscita
0,5 1,5 / 0,75 1,5 mm²
Spellatura dei cavi in ingresso
8,5 9,5 mm
Altezza
210 mm
Larghezza
300 mm
Lunghezza
2100 mm
Spellatura dei cavi in uscita
8,5 9,5 mm
Colori e materiali
Materiale dell'involucro
Metalli
Temperature e condizioni di utilizzo
Temperatura ambiente
-25 +50 °C
Temperatura massima nel punto di prova T
75 °C
Max temp involucro in caso di malfunzion
110 °C
Temperatura di stoccaggio
-25 80 °C
Umidità relativa
5 85 %
Durata
Durata ECG
50000 / 100000 h
Caratteristiche
Dimmerabile
No
Protezione contro il surriscaldamento
Reversibile automatico
Protezione contro il sovraccarico
Reversibile automatico
Protezione contro i corto circuiti
Reversibile automatico
Prova funzionamento a vuoto
Sì
Intended for no-load operation
No
Lunghezza massima cavi ECG/lampada
2,0 m
Idoneo per apparecchi con vetro frontale
I
Number of channels
1
Programming
Programming device
DIPswitch
Certificati, Norme, Direttive
Marchi di approvazione
CE / ENEC 05 / EAC / CCC / BIS / RCM
Norme
Secondo IEC 61347-1/Secondo IEC 61347-2-13/Secondo IEC 62384/Secondo IEC 61000-3-2/Secondo IEC 61000-3-3/Secondo IEC 61547
Grado di protezione
IP20
Dati logistici
Codice prodotto di base
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899531437
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
61485c6a-f241-4036-ad91-92b3fa8b2d6a
Informazioni sull'imballo
EAN |
Unità |
Pezzo |
Dimensioni |
Peso |
Volume |
---|---|---|---|---|---|
4052899531437 |
UNV
| 1 | 210mm x 30mm x 21mm | 125.00g | 0.13dm³ |
4052899531444 |
VS
| 20 | 234mm x 161mm x 101mm | 2665.00g | 3.81dm³ |
Download
Maggiori informazioni per la famiglia di prodotto
Caratteristiche prodotto
- Tensione di alimentazione: 220 240 V
- Frequenza di linea: 50 Hz | 60 Hz
- Tensione di linea: 198 264 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nome del prodotto |
|
|
|
|
|
Scheda tecnica | ||
---|---|---|---|---|---|---|---|---|
OT FIT 35/220...240/350 D CS L
|
40 160 / 40 115 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 65/220-240/350 D CS L
|
70 220 / 70 190 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 75/220-240/350 D CS L
|
70 220 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm |