BA-L-CX-840-G5
- High module flux output up to 162 lm
- 5 year warranty
- Wide beam angle for high uniformity
- Good solution to reduce system cost
Dati tecnici
Dati elettrici
Tensione nominale
120 V
Potenza nominale per catena
3000 W
Potenza nominale per modulo LED
1.5 W
Accidental reverse input voltage protection up to
13 V
Gamma di tensione
12 13 V
Tipo di corrente
DC
Dati fotometrici
Temperatura di colore
4000 K
Indice di resa cromatica Ra
80
Colore della luce (descrizione)
Neutral White
Flusso luminoso per catena di moduli
3240 lm
Flusso luminoso per modulo LED
162 lm
Efficienza luminosa
108 lm/W
Informazioni sul modulo LED
Numero di LED per modulo
3
Numero di moduli LED per catena
20
Numero minimo utilizzabile di moduli LED
1
Dimensioni e peso
Lunghezza
3100 mm
Larghezza
124 mm
Altezza
62 mm
Peso prodotto
12000 g
Module pitch
150 mm
Module length
60.6 mm
Temperature e condizioni di utilizzo
Temperatura di funzionamento
-25 85 °C
Temperatura di stoccaggio
-25 80 °C
Durata
Durata
50000 h
Dati di prodotto aggiuntivi
Nota a pié pag. utilizzata per prodotto
Moduli abbinati perfettamente al dispositivo di controllo elettronico 12 V OSRAM OPTOTRONIC/Per i dati fotometrici e informazioni importanti su sicurezza, installazione e applicazione, consultare il sito www.osram.com/led-systems./Tutti i parametri tecnici si applicano al modulo completo. In considerazione del complesso processo di produzione dei diodi a emissione luminosa, i valori tipici forniti sopra per i parametri LED tecnici sono puramente valori statistici che non corrispondono necessariamente ai valori tecnici effettivi di un singolo prodotto; i singoli prodotti possono variare dai valori tipici
ID of contained light source [AGGR]
LS_SHZ_601330
EAN sostitutivo
4062172145619
Caratteristiche
Campo di regolazione
1 100 %
Certificati, Norme, Direttive
Consumo di energia
30 kWh/1000h
Grado di protezione
IP66
Norme
Secondo IEC 62471-2/Secondo IEC 60598-1/Secondo EN 60529/Secondo EN 62031/Secondo IEC 60598-1/Secondo EN 55015/Secondo EN 61547
Marchi di approvazione
CE / UKCA / ENEC 25 / BIS
Energy efficiency class of the contained light source
F
Dati logistici
Codice prodotto di base
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
31-05-2023
Primary Article Identifier
4062172327862
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Informazioni sull'imballo
EAN |
Unità |
Pezzo |
Dimensioni |
Peso |
Volume |
---|---|---|---|---|---|
4062172327862 |
BT
| 1 | 140.00g | ||
4062172327879 |
VS
| 60 | 365mm x 265mm x 318mm | 9000.00g | 30.76dm³ |
Download
Maggiori informazioni per la famiglia di prodotto
- Color consistency in 3 SDCM
- Diffusive Optics technology
- Wide CCT options available
- IP66 Rated
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nome del prodotto |
|
|
|
|
|
Scheda tecnica | ||
---|---|---|---|---|---|---|---|---|
BA-L-CX-810-G5
|
10000 K | 80 | 150 lm | 1.5 W | 100 lm/W | |||
BA-L-CX-880-G5
|
8000 K | 80 | 150 lm | 1.5 W | 100 lm/W | |||
BA-L-CX-865-G5
|
6500 K | 80 | 162 lm | 1.5 W | 108 lm/W | |||
BA-L-CX-840-G5
|
4000 K | 80 | 162 lm | 1.5 W | 108 lm/W | |||
BA-L-CX-830-G5
|
3000 K | 80 | 150 lm | 1.5 W | 100 lm/W |