OPTOTRONIC - 2DIM IP64
Caratteristiche prodotto
- Disponibile con diverse potenze: 50 W, 100 W, 110 W
- Tensione d'ingresso: 120 277 V
- Disponibile con valori di corrente in uscita fino a 1400 mA
- Impostazione flessibile della corrente con un cavo supplementare (LEDset2)
- Funzione AstroDIM per dimmerazione autonoma con cinque livelli indipendenti (astro mode)
- Interfaccia isolata 1 10 V per sistemi di telegestione unidirezionali
- Protezione dalle sovratemperature tramite NTC esterno o interfaccia LEDset2
Vantaggi prodotto
- Funzionalità 2DIM in un unico apparecchio (AstroDIM, 0 10 V)
- Elevata protezione dalle sovratensioni: fino a 6 kV (in classe di isolamento I o II)
- Rapida programmazione senza tensione di rete
- Elevata flessibilità grazie all'ampio intervallo delle temperature di esercizio (-40 55 °C)
- Protezione tramite doppio isolamento tra l'ingresso rete e l'uscita LED
Apparecchiatura / Accessori
- Necessita di hardware di programmazione OT per configurare gli ECG 2DIM
- Programmabile tramite software Tuner4TRONIC
Products
Nome del prodotto |
|
|
|
|
Scheda tecnica | ||
---|---|---|---|---|---|---|---|
OT 50/120
277/800 2DIMLT2 P
|
350 800 mA | 168,0 mm | 50,0 mm | 30,0 mm | |||
OT 50/120
277/1A2 2DIMLT2 P
|
600 1250 mA | 168,0 mm | 50,0 mm | 30,0 mm | |||
OT 100/120
277/800 2DIMLT2 P
|
350 800 mA | 168,0 mm | 68,0 mm | 38,0 mm | |||
OT 110/120
277/1A4 2DIMLT2 P
|
600 1400 mA | 168,0 mm | 68,0 mm | 38,0 mm |
Maggiori informazioni per la famiglia di prodotto
Aree applicative
- Illuminazione stradale e urbana
- Industria
- Adatto per apparecchi di illuminazione in classe di isolamento I e II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.