LF500-G1-927-10 L2
Dati tecnici
Dati elettrici
Tensione nominale
24,0 V
Tipo di corrente
DC
Potenza nominale al metro
3,9 W
Potenza di costruzione
39,00 W
Gamma di tensione
23 25 V
Accidental reverse input voltage protection up to
25 V
Dati fotometrici
Tonalità di luce del LED
bianco
Indice di resa cromatica Ra
≥90
Flusso luminoso al metro
400 lm
Flusso luminoso utile totale
4000 lm
Efficienza luminosa
103 lm/W
Standard Deviation of Color Matching
≤3 sdcm
Colore della luce (descrizione)
2700 K
Temperatura di colore
2750 K
Temperatura di colore
2750 K
Dati illuminotecnici
LED pitch
14.29 mm
Ampiezza fascio luminoso
120 °
Tempo innesco
< 0,5 s
Tempo di riscaldamento (60 %)
< 0,50 s
Informazioni sul modulo LED
Numero di LED al metro
70
Numero di LED per unità più piccola
7
Dimensioni e peso
Lunghezza
10000,0 mm
Lunghezza unità più piccola
100,0 mm
Peso prodotto
86,40 g
Larghezza
8,00 mm
Altezza
1,40 mm
Sezione dei cavi, lato ingresso
0.51 mm²
Temperature e condizioni di utilizzo
Performance temp. acc. to IEC 62717
35 °C
Temperatura di funzionamento
-30 75 °C
Temperatura di stoccaggio
-40 85 °C
Durata
Durata caratteristica della lampada
60000 h
Durata nominale della lampada
60000 h
Fattore manten. flus lum fine durata nom
0,70
Numero cicli accensione / spegnimento
15000
Dati di prodotto aggiuntivi
ID of contained light source [AGGR]
LS_TRV_274093
Caratteristiche
Lowest bending radius
20 mm
Self-adhesive
Sì
With connection set
No
With end piece
No
Certificati, Norme, Direttive
Consumo di energia
43 kWh/1000h
Norme
CE/UL/ENEC/EAC
Grado di protezione
IP20
Energy efficiency class of the contained light source
F
Dati logistici
Codice prodotto di base
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4062172272070
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
66917f36-0515-40bc-839b-31cd32cf214a
Informazioni sull'imballo
EAN |
Unità |
Pezzo |
Dimensioni |
Peso |
Volume |
---|---|---|---|---|---|
4062172272070 |
FS
| 1 | 186mm x 190mm x 29mm | 179.00g | 1.02dm³ |
4062172272087 |
VS
| 8 | 241mm x 195mm x 205mm | 1624.00g | 9.63dm³ |
Download
Accessori facoltativi
Maggiori informazioni per la famiglia di prodotto
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nome del prodotto |
|
|
Scheda tecnica | ||
---|---|---|---|---|---|
LF500-G1-925-10 L2
|
≥90 | 400 lm | |||
LF500-G1-927-10 L2
|
≥90 | 400 lm | |||
LF500-G1-930-10 L2
|
≥90 | 400 lm | |||
LF500-G1-940-10 L2
|
≥90 | 440 lm | |||
LF500-G1-840-10 L2
|
>80 | 520 lm |